- 您现在的位置：买卖IC网 > Sheet目录221 > DS1922L-F5# (Maxim Integrated)IBUTTON TEMP LOGGER
DS1922L/DS1922T
iButton Temperature Loggers
with 8KB Data-Log Memory
ing in the command code, the target addresses TA1
and TA2, and all the data bytes. The DS1922L/DS1922T
transmit this CRC only if the data bytes written to the
scratchpad include scratchpad ending offset 11111b.
The data can start at any location within the scratchpad.
With the Read Scratchpad command, the CRC is gen-
erated by first clearing the CRC generator and then
shifting in the command code, the target addresses
TA1 and TA2, the E/S byte, and the scratchpad data
starting at the target address. The DS1922L/DS1922T
transmit this CRC only if the reading continues through
the end of the scratchpad, regardless of the actual
ending offset. For more information on generating CRC
values, refer to Application Note 27.
Command-Specific 1-Wire Communication Protocol—Legend
SYMBOL
RST
PD
Select
WS
RS
CPS
RMC
CM
FC
SM
STP
TA
TA-E/S
<Data to EOS>
<Data to EOP>
<Data to EOM>
<PW/Dummy>
<32 Bytes>
<Data>
FFh
CRC-16
FF Loop
AA Loop
Busy
Maxim Integrated
DESCRIPTION
1-Wire reset pulse generated by master.
1-Wire presence pulse generated by slave.
Command and data to satisfy the ROM function protocol.
Command “Write Scratchpad.”
Command “Read Scratchpad.”
Command “Copy Scratchpad with Password.”
Command “Read Memory with Password and CRC. ”
Command “Clear Memory with Password.”
Command “Forced Conversion. ”
Command “Start Mission with Password.”
Command “Stop Mission with Password.”
Target Address TA1, TA2.
Target Address TA1, TA2 with E/S byte.
Transfer of as many data bytes as are needed to reach the scratchpad offset 1Fh.
Transfer of as many data bytes as are needed to reach the end of a memory page.
Transfer of as many data bytes as are needed to reach the end of the data-log memory.
Transfer of 8 bytes that either represent a valid password or acceptable dummy data.
Transfer of 32 bytes.
Transfer of an undetermined amount of data.
Transmission of one FFh byte.
Transfer of an inverted CRC-16.
Indefinite loop where the master reads FF bytes.
Indefinite loop where the master reads AA bytes.
Interval during Copy Scratchpad where the DS1922L/T does not respond. Any bits read during this
time are logic 1.
45
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
DS1923-F5#
IBUTTON TEMP/HUMIDITY LOGGER F5
DS1961S-F3#
IBUTTON EEPROM 1KBit F3
DS1963S-F5+
IBUTTON MONETARY SHA-1
DS1971-F3+
IBUTTON EEPROM 256KBIT F3
DS1972-F3+
IBUTTON EEPROM 1KBit F3
DS1973-F3+
IBUTTON EEPROM 4KBit F3
DS1977-F5#
IBUTTON EEPROM 32KBit F5
DS1982-F5+
IBUTTON 1KBit ADD-ONLY F5
相关代理商/技术参数
DS1922L-F5#A20
功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5#A22
功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5#W
功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5/A1E
功能描述:iButton
RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5/A20
功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F5+
功能描述:iButton
RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1922L-F50
制造商:Maxim Integrated Products 功能描述:THERMOCHRON,IBTN,F5,HI-RES,8 - Rail/Tube
DS1922L-F5W
功能描述:iButton
RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated